5 min read
Warehouse Handling Costs for Trade Printers: A Worked Example
Most trade printers quote carriage but not the labour behind it. Here is a line-by-line, hypothetical worked example of the true cost of picking, packing and dispatching one job.

Trade printers often quote carriage and forget the labour behind it. Someone counts, boxes, labels, books a courier and chases a missing pallet, and that time rarely appears on any estimate. This article walks through how to calculate warehouse handling cost per print job, line by line, using a hypothetical example that warehouse and dispatch supervisors can adapt to their own floor.
The point is not that handling is expensive. It is that a trade customer sending twelve small drop-ship parcels costs you very differently from one sending a single pallet, and your price should reflect your true cost, not a guess or a competitor's headline figure.
Why handling cost gets lost in trade work
Trade printers typically produce for other printers, agencies and resellers. Work is often white-labelled, delivered direct to the reseller's end customer, and split across several addresses. That means more cartons, more labels, plain packing notes and more exceptions than a standard delivery to one address.
If handling is absorbed into the print price, the jobs with the most dispatch effort quietly lose margin. The supervisor sees it daily; finance rarely does. Putting a number on it gives you evidence to bring to the estimator.
Step 1: Work out your handling labour rate
Start with a rate per minute for warehouse labour, not just the hourly wage.
Hypothetical figures:
- Basic hourly wage: £13.00
- Employer on-costs (national insurance, pension, holiday cover) at 25%: £3.25
- Loaded hourly cost: £16.25
- Productive hours per paid hour (allowing for breaks, searching, interruptions): 80%
- Productive hourly cost: £16.25 ÷ 0.80 = £20.31
- Per minute: roughly £0.34
Use your own numbers. The productive-hours adjustment matters most, because a packer is not packing for every paid minute.
Step 2: Time the tasks for one job
Take a hypothetical trade job: 600 branded presentation folders for a reseller, to be delivered as 12 parcels of 50 to separate addresses, each with a plain (unbranded) packing note.
Time each task with a stopwatch on a real run, not from memory. Hypothetical timings:
| Task | Time |
|---|---|
| Receive finished goods from finishing, check against job ticket | 6 min |
| Count and split into 12 batches of 50 | 14 min |
| Build 12 cartons, pack and fill voids | 24 min |
| Print and attach 12 labels and plain packing notes | 12 min |
| Book 12 consignments with the courier, enter references | 15 min |
| Stage for collection and mark job as dispatched | 5 min |
| Total | 76 min |
At £0.34 a minute, labour comes to about £25.84.
Step 3: Add packaging materials
Count what physically goes into the box. Hypothetical unit costs:
- 12 cartons at £0.85: £10.20
- Void fill and tape, £0.20 per parcel: £2.40
- Labels and packing notes, £0.10 per parcel: £1.20
- Materials total: £13.80
Waste matters too. If one carton in twenty is damaged or mis-built, add 5% to the materials figure: about £0.69, bringing materials to £14.49.
Step 4: Add storage, if it applies
Trade customers often ask you to hold stock and release it in call-offs. Suppose these folders sit for three weeks before dispatch on a shared shelf bay costing you a hypothetical £30 a week, and the job uses a tenth of the bay.
- Storage: £30 × 3 weeks × 10% = £9.00
If the stock is customer-owned and you charge for storage, record it against the customer. If you do not charge, it is still a cost, and the supervisor should flag how long it sat. See how warehouse and inventory management handles customer-owned stock and partial releases.
Step 5: Add the carriage you pay
Courier charges are the visible cost. Hypothetical: 12 parcels at £6.50 each, a total of £78.00. Add any surcharges you are billed, such as residential delivery or remote-area fees, and say so when they apply.
Step 6: Add the exceptions allowance
Some parcels will fail delivery, be re-addressed or need a reprint of a label. Rather than ignoring these, apply a modest allowance based on your own history. In this example we assume 3% of carriage and labour, about £3.12.
Step 7: Total the true handling cost
| Line | Hypothetical cost |
|---|---|
| Labour | £25.84 |
| Packaging materials (incl. waste) | £14.49 |
| Storage | £9.00 |
| Carriage | £78.00 |
| Exceptions allowance | £3.12 |
| Total | £130.45 |
That is about £0.22 per folder, or £10.87 per parcel. Now compare with the same 600 folders on one pallet to one address. Labour might drop to 25 minutes, materials to a few pounds, and carriage to a single pallet charge. The print is identical; the handling cost is far lower.
Step 8: Turn the number into a pricing rule
Once you have worked examples like this, build simple rules rather than recalculating each time:
- A per-drop charge covering labour, materials and a margin for each separate delivery address.
- A pallet or single-address rate for consolidated deliveries.
- A storage rule: free for a set number of days, then charged per week.
- Carriage passed through at cost plus an agreed handling percentage.
- A surcharge for plain packing, custom labels or special packing instructions.
The estimator can then add these to the quote so the customer sees why twelve addresses cost more than one. This follows the same logic as pricing from your true cost rather than copying a competitor's rate: you cannot know whether a rival's delivery price is profitable, but you can know yours.
Common mistakes to avoid
- Using the wage, not the loaded rate. On-costs and non-productive time are real.
- Timing a perfect run. Time an ordinary Tuesday afternoon, including interruptions.
- Ignoring split deliveries. Each address multiplies labour, labels and booking time.
- Forgetting stock held for clients. Shelf space is not free.
- Never feeding actual times back. Revisit the figures every quarter, or when courier rates or staffing change.
Getting the numbers to the estimator
Supervisors hold the data that makes quotes accurate, but it often stays on the warehouse floor. A short monthly note to estimating covering typical minutes per drop, packaging costs and exception rates is enough to keep delivery lines honest. Where jobs, warehouse releases and delivery sit in one system, such as the delivery and fulfilment module in ePRO, actual dispatch data is easier to compare with what was quoted. The result is a handling charge based on your own warehouse, and not on guesswork.
Next step
Pick one recent multi-drop trade job, time it from receipt to dispatch, and complete the table above with your own figures. Then compare the result with what you actually charged. If you want to see how handling and carriage costs can be carried into print estimating, you can request a demo.
Frequently asked questions
How many jobs should I time before setting a handling rate?
Aim for at least five to ten jobs across different types: single address, multi-drop, pallet and call-off. Averages from a handful of real runs are far better than a single estimate. Repeat the exercise when processes or staffing change.
Should handling be a separate line on the quote or built into the price?
For trade work with variable delivery patterns, a separate line is usually clearer, since it explains why multi-drop jobs cost more. If you prefer a single price, use the same calculation behind the scenes so you still know the margin.
How do I cost handling for customer-owned stock released in call-offs?
Treat each release as its own dispatch with its own labour, materials and carriage, then add storage for the time held. Billing per release keeps long-running call-off jobs from absorbing handling costs invisibly.



